Pressure in the water pipes is necessary as it forces the water into the pipes of the city and then into the water outlets of our homes. Higher pressures are better as they cause the flow of water from the outlets to be sufficient. Weak water pressure is a hassle when the pressure of water from our outlets, in kitchen or bathroom, is not of the desired levels. In addition, there could be several reasons for that. Pressure in water like all other fluids and gases can be measured in Pounds per Square Inch (PSI)

Weak water pressure, while is quite easy to notice, is difficult to detect. Therefore, we mostly need to contact a professional for plumbing repair in Cleveland, TN to help detect and solve the problem. This is because plumbers in Cleveland, TN would have the knowledge and experience enough to be able to tell where the problem could be and know exactly how a particular problem should be dealt with.

As per the experts of plumbing repair in Cleveland, TN, low water pressure is something that has been a source of frustration for many households as it makes daily tasks and chores more difficult and more time consuming. Imagine you are doing the dishes and water pressure is extremely low, it would seem to take ages for you to get done with one dish before you move to the next.

Therefore, let us look at what causes the low water pressure inside our homes and how to go about getting rid of this frustrating problem.

Reasons for Weak Water Pressure

When you experience a weak pressure of water in the outlets at your home, it makes you wonder what the reason could possibly be.  There are several reasons why this could be happening. One basic reason is the location of the house. If your house is far away from the reservoir, you will experience low pressure, and if you live nearby, the pressures would be much better. Another factor that comes into play is how high or low the reservoir is placed.

The more above the ground the reservoir is, the higher pressures you will experience. On the other hand, if it is placed at a relatively lower elevation, the pressure at your home will be low too. Similarly, if your house is located on a higher part or on a hill, the difference between the heights of the reservoir and the house would be lesser and hence the pressure would again be lower. The same goes for the location of reservoirs, if they are placed on a higher part of the area, the homes in the area receive a good water pressure.

When is it a problem?

If the pressure problems are due to the location of the house, then you know there is nothing you can do about it. Also, it is not even a problem for which you might need a plumbing repair in Cleveland, TN.

After you have moved and have been living in an area for awhile, you notice the pressure change. Then it is a problem. You can check at the water meter to see if the pressure has been reduced in the supply, which is quite less likely. In such situations, it is mostly inside the house. And this is when you need a plumbing repair in Cleveland, TN.

So what could be the reason for low pressure inside the house? Let us see.

Mineral Deposits Inside Pipes

Water supplied to our homes has several contaminants, minerals and pollutants. These include dirt, sand, and debris which enter the house’s pipelines if the supply lines get cracked somewhere. These contaminants build up in the pipes in the house and affect the water flow. In addition to sand and dirt, minerals in the water can also start building up in the pipes causing the problem. This buildup prevents the water from flowing properly and causes the pressure to become low.

Corrosion of Pipes

If your pipelines are metal, they can easily become corroded internally from staying in contact with water for a long time. This rusting and corrosion also causes buildups to form inside the pipes hindering the normal flow of the water. This is another reason for the pressure in the house being low.

Plumbing Leaks

Another reason why you might be experiencing low water pressure is the plumbing leaks inside the house. If there are leaks, the water not only flows out of the faucets, but also through those leaks, which divides the pressure. Hiring a professional for plumbing repair in Cleveland, TN is a good solution to this problem as they can effectively locate and repair the leakage problem, which will also fix the pressure issue.

How to Solve

Before you can even start looking at how you will go about solving the water problems, you need to first determine if the problem is with just one or all of the outlets. If the problem is just at one of the faucets or outlets in the kitchen or the bathroom, you might just be able to get it solved by calling a professional for plumbing repair in Cleveland, TN, who will fix the aerator. If this does not solve the problem, then you should know this is something to be concerned about. Even in this case you will need to hire a plumbing repair in Cleveland, TN, but the work required would be a lot more extensive.

Since plumbing is not something everyone can do, there is no way you can solve it yourself. You will need help from a professional sooner or later. And you know when it comes to plumbing repair in Cleveland, TN, the sooner is the better.

If you live in Cleveland and experience low water pressure, our experts at Metro Plumbing, Heating and Air are just a call away.