Photo By KaliAntye at Shutterstock
Are you worried that you have problems with your septic tank? Have you bought an older property that needs a replacement septic tank? Or perhaps you’re searching for septic tank repair or septic tank pumping?
If you’re a homeowner, it’s crucial that you regularly get your septic tank pumped out and that you monitor the health of your septic system. You’ll then be able to get a professional to carry out repairs before any problems become more severe, and you need to replace the whole system. This will save you both time and money in the long run.
If you own a property in Cleveland, TN, and are looking for septic tank repair or replacement, you may like to contact Metro Plumbing, Heating, and Air, who can give you advice about your septic system. They are also available for heating and air conditioning installation and general plumbing work.
What Is a Septic Tank?
Most homes have their own wastewater management systems in their gardens; these are called septic tanks. The primary purpose of a septic tank is to treat the home’s sewage rather than transporting the waste to a treatment plant. Septic tanks are more common in rural areas and are used to manage the sewage from an individual home or other building such as a school or church.
It’s essential to know how to maintain your septic tank if you have one as they need to be emptied regularly. If there are any problems, you’ll need a professional company to carry out septic tank repair before sewage is backed up into your home or surfaces in your garden.
How Does a Septic Tank Work?
When you flush your toilet, untreated sewage from your home travels to the septic tank, where it goes through a separation process. The heavy solids sink to the bottom of the tank, and light solids form a scum on top, the liquids drain away. A biological process will then take place to help the solids disintegrate. Your septic tank will need to be pumped out every three to five years to keep it in good working order.
Septic Tank Repair
If your septic tank fails to work efficiently, untreated sewage will be released. This will either mean that your garden becomes soggy with wastewater and sewage, or it will back up your pipes and cause a blockage. In the worst cases, sewage will come back up into the pipes and flood into your home.
Look out for these signs as they’ll tell you that you need to hire a plumber for septic tank repair. If you have water or sewage backing up into your home via your drain, sink, or toilet, it’s a sign that there may be problems with your septic tank.
It’s also a good idea to regularly check around your septic tank and drain field. Check to see that there are no damp patches around the septic tank, as this shows that it’s likely to be overflowing. Bad smells near the septic tank indicate that you need septic tank repair or pumping. Look out for unusually green grass or spongy grass above the septic tank. This is especially unusual during dry weather.
Gurgling noises inside your home or baths and showers that drain slowly indicate plumbing problems that could be caused by the septic tank. It’s important to get these problems fixed as untreated sewage contains pathogens, as well as other germs that can contaminate your home and affect your family’s health and wellbeing. In serious cases, contaminants could get into your water supply, which will make it unsafe for drinking. If you live in a rural area, untreated sewage could seep away and get into rivers and lakes, which will make it unsafe for swimming and cause environmental contamination, which can affect fishing or agriculture.
Common Reasons That Septic Tanks May Fail
A common cause of septic tank problems is that the pipes from your home to the tank become blocked. If this is the case, your drains will either stop working entirely or will drain very slowly.
You can easily prevent your pipes from becoming clogged by only putting human waste or toilet paper down your toilet. Avoid flushing sanitary products and have your septic system inspected regularly.
Your septic tank may also have issues if the inlet to the tank gets blocked. This causes similar problems to having blocked pipes. This problem can also be avoided by only flushing human waste.
If you have sewage backing up into your home or surfacing around the septic tank, this may be due to a failure with the effluent filter. This could also be the result of the tank having to process too much water in a short space of time. In this case, the effluent filter will likely need to be either cleaned and refitted or completely replaced.
It could also be that the problem lies with your drain field, rather than the septic tank itself. When a drain field has issues such as saturation, sewage may come back into your home. There will also be wet areas surrounding the drain field and bright green grass commonly grows. You may even notice that there’s spongy grass above your septic tank. The system has likely been operated incorrectly. This has caused too many solids to make it into the drain field, causing it to fail. The septic system may also have failed if its been in use for a long time without being pumped out. It would, therefore, be full and unable to hold any more waste.
In any of these situations, the best thing to do would be to contact a professional company that can determine what the problems are and carry out septic tank repair.
Septic Tank Repair: Metro Plumbing, Heating and Air, Cleveland, TN
If you’re searching for septic tank repair or pumping locally contact Metro Plumbing, Heating, and Air. Their phone number is 423-668-0507; they can be contacted 24/7 and are available for emergency call out.
